Outerra forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Outerra Tech Demo download. Help with graphics driver issues

Pages: [1] 2

Author Topic: Naboo N-1 StarFighter 2.0  (Read 20785 times)

adriaan

  • Member
  • **
  • Posts: 91
  • newbie
Naboo N-1 StarFighter 2.0
« on: June 12, 2013, 04:33:36 am »

This is a slightly improved version of my Starfighter.
-fixed the hole under R2
-adjusted the bump and specularity maps
-made some changes to the matlib
Use 100% throttle to lift off instantly. then decrease to 99% to fly steady (it starts shaking when going to fast)
Have fun!




download : https://mega.co.nz/#!qUJ3SY5D!aI8kDi0ksGZ9tStwi6ClZTApHsoUtFiTXRCLFo2q9RY
« Last Edit: June 16, 2013, 05:27:58 am by adriaan »
Logged

angrypig

  • Sr. Member
  • ****
  • Posts: 454
Re: Naboo N-1 StarFighter
« Reply #1 on: June 12, 2013, 06:05:19 am »

use this material settings:
Code: [Select]
{
"name" : "glass",
"diffuse" : "0.1,0.1,0.1,0.95",
"Ax" : "0.08",
"Ay" : "0.08",
"m" : "0.02",
"tex_diffuse" : "",
"tex_normal" : "",
"tex_env" : "",
"tex_opacity" : "",
"tex_reflectance" : ""
},
Logged

adriaan

  • Member
  • **
  • Posts: 91
  • newbie
Re: Naboo N-1 StarFighter
« Reply #2 on: June 12, 2013, 06:16:04 am »

thanks! i followed cameni's guideline to add a thumbmail but it doesnt show up. just put it inside the package. same name as objdef and then export?
Logged

Pyroman31FF

  • Jr. Member
  • *
  • Posts: 41
Re: Naboo N-1 StarFighter
« Reply #3 on: June 12, 2013, 06:57:27 am »

Build Tie Fighters, Rebels lost the war!
Logged

adriaan

  • Member
  • **
  • Posts: 91
  • newbie
Re: Naboo N-1 StarFighter
« Reply #4 on: June 12, 2013, 07:02:07 am »

but tie fighters are ugly as hell
Logged

cameni

  • Brano Kemen
  • Outerra Administrator
  • Hero Member
  • *****
  • Posts: 6718
  • No sense of urgency.
    • outerra.com
Re: Naboo N-1 StarFighter
« Reply #5 on: June 12, 2013, 07:06:08 am »

thanks! i followed cameni's guideline to add a thumbmail but it doesnt show up. just put it inside the package. same name as objdef and then export?
It should show even without the export. Same name as objdef, gif extension. There was a problem of it not showing sometimes in earlier versions, but it was fixed in 3722
Logged

adriaan

  • Member
  • **
  • Posts: 91
  • newbie
Re: Naboo N-1 StarFighter
« Reply #6 on: June 12, 2013, 08:14:28 am »

got it;)
Logged

adriaan

  • Member
  • **
  • Posts: 91
  • newbie
Re: Naboo N-1 StarFighter
« Reply #7 on: June 12, 2013, 08:45:20 am »

here she is. quite fast and very agile. i really recommend some kind of joystick.
feel free to edit the matlib of jsbsim.
have fun!
download: https://mega.co.nz/#!7ExUBRgZ!RZ4D9WAZuo_P0mdS5knCN2ETUuc7Wf0q58Y7qrymXq4








Logged

Ozybolairy

  • Jr. Member
  • *
  • Posts: 40
  • newbie
Re: Naboo N-1 StarFighter
« Reply #8 on: June 12, 2013, 09:45:19 am »

Sky rockets in flight, afternoon delight!
Logged

Revolver

  • Hero Member
  • *****
  • Posts: 661
  • Adlerhorst-Hangar Design Group ©
Re: Naboo N-1 StarFighter
« Reply #9 on: June 14, 2013, 12:49:54 am »

use this material settings:
Code: [Select]
{
"name" : "glass",
"diffuse" : "0.1,0.1,0.1,0.95",
"Ax" : "0.08",
"Ay" : "0.08",
"m" : "0.02",
"tex_diffuse" : "",
"tex_normal" : "",
"tex_env" : "",
"tex_opacity" : "",
"tex_reflectance" : ""
},

Your info has helped me very much, thanks.
I have one more asks in addition;
if the possibility also passes the glass
to make a little matt (not so transparently)?
Logged
"Es gibt nur eine Sünde, die gegen die ganze Menschheit mit allen ihren Geschlechtern begangen
werden kann, und dies ist die Verfälschung der Geschichte."(F.Hebbel)


adriaan

  • Member
  • **
  • Posts: 91
  • newbie
Re: Naboo N-1 StarFighter
« Reply #10 on: June 14, 2013, 02:11:43 am »

no idea. angrypig should know
Logged

Atrax

  • Full Member
  • ***
  • Posts: 119
  • newbie
    • AtraxGaming Game Shop
Re: Naboo N-1 StarFighter
« Reply #11 on: June 14, 2013, 06:16:46 am »

Thatnks for the download, hope to see more stuff from you in near future! :D

bugsblake

  • Sr. Member
  • ****
  • Posts: 255
  • jedi master
Re: Naboo N-1 StarFighter
« Reply #12 on: June 14, 2013, 09:51:26 am »

if you want it to be less transparent, the 4th number on the matlib will do that! if yours is set to 0.95, try 2.95! if thats not matt enough up it a bit to 4.95 and so on! ;) hope that helps!

thanks for the download! this thing is quick! got it up to 200,000ft! before i dropped out of the sky! :) though looked more like i dropped from space at that hight! :D i wonder if you can make working thrusters for space travel yet? hmmm ;)
Logged
Intel 6 core i7 Xeon - 4930k @3.40 GHz
GTX 770 4GB X2 in SLI
Asus P9X79 Extreme MOBO
Patriot 16GB DDR3 1600MHz
SSD 250GB + SATA 500GB + SATA 1TB

Revolver

  • Hero Member
  • *****
  • Posts: 661
  • Adlerhorst-Hangar Design Group ©
Re: Naboo N-1 StarFighter
« Reply #13 on: June 14, 2013, 09:56:49 am »

thanks... ;)

p.s.

with the 4-number is not right.
Is closed now tried out and
Result come, that this
to these figures are responsible.
"Ax": "0.08", (more matt = 0.10+...)
"Ay": "0.08", (more matt = 0.10+...)
« Last Edit: June 14, 2013, 10:22:14 am by Revolver »
Logged
"Es gibt nur eine Sünde, die gegen die ganze Menschheit mit allen ihren Geschlechtern begangen
werden kann, und dies ist die Verfälschung der Geschichte."(F.Hebbel)


angrypig

  • Sr. Member
  • ****
  • Posts: 454
Re: Naboo N-1 StarFighter
« Reply #14 on: June 14, 2013, 10:35:24 am »

the material matte is controlled by m parameter... perfect matte material has m=1.0
Logged
Pages: [1] 2